-Ceramic Dredging Hose
─Overview
Ceramic Hose
Overview
Wearing lining with ceramic pieces of various patterns, round, square, and hexagonal, ceramic rubber hose has a better wear-resistant. Shown is our ceramic suction hose. It includes floating hose, discharge hose, suction hose, and expansion joint. Ceramic rubber hose is suitable for dredging slurry and sand. It’s convenient to install and flexible to use.
─ Feature & Applications
Ceramic Dredging Hose
Feature & Applications
Feature & Benefit
- Ceramic lining is 12 times more wear-resistant than stainless steel.
- Impact resistant : virtually impossible to destroy the ceramic segments.
- Flexible : minimum bend radius is roughly 12 times the hose I.D.
- Corrosion-resistant : compatible with most chemicals found in slurries.
- Wide variety of end-connections.
- The suitable working temperature: from -100℃ to +250℃ .
Applications
- Ceramic rubber hose is suitable for dredging slurry and sand.
- For floating hose pipelines in severe slurry applications.
─ Factory
Ceramic Hose
Manufacturer
SunHelm Marine specializes in the production of engineering products for dredger dredging pipelines. Sunhelm Marine has more than 20 years of production experience and has built large-scale production workshops with an indoor storage area of 12,000㎡. SunHelm Marine is a leading manufacturer of dredging pipeline products.
SunHelm Marine has the ability to produce dredging mud suction and discharge hoses with a maximum diameter of 1100mm and various types of special steel pipe floats for dredging. SunHelm Marine relies on various advanced testing facilities to accurately control product quality.
─Structure
Ceramic Dredging Hose
Technical Parameters
I.D.(mm) | OD(mm) | W.P.(bar) | B.P.(bar) | Max. V | B.R.(mm) | Weight | Length |
40 | 73±2 | 10.0 | 30 | 0.9 | 150 | 3.97 | 1 |
50 | 83±2 | 10.0 | 30 | 0.9 | 200 | 4.8 | 1 |
65 | 98±2 | 10.0 | 30 | 0.9 | 300 | 5.8 | 1 |
80 | 113±2 | 10.0 | 30 | 0.9 | 350 | 6.7 | 1 |
100 | 113±2 | 10.0 | 30 | 0.9 | 400 | 8.2 | 1 |
125 | 158±2 | 10.0 | 30 | 0.9 | 600 | 10.1 | 1 |
150 | 183±2 | 10.0 | 30 | 0.9 | 700 | 11.9 | 1 |
200 | 234.5±2 | 10.0 | 30 | 0.9 | 1300 | 16.7 | 1 |
250 | 285.5±2 | 10.0 | 30 | 0.9 | 1750 | 22.62 | 1 |
300 | 340.5±2 | 10.0 | 30 | 0.9 | 2400 | 31.5 | 1 |
350 | 391±3 | 10.0 | 30 | 0.9 | 3150 | 39.05 | 1 |
400 | 441±3 | 10.0 | 30 | 0.9 | 4000 | 43.6 | 1 |
NOTE: Upon availability. Tolerance on length: ± 1 % (ISO 1307 Standard). |
|
─ Supporting
Pipe Floats
Overview
Pipe floats are the flotation of pipes, hoses, and cables for dredging, mining, and marine applications.
They are always used with HDPE pipes, steel pipes, and rubber hoses to make the pipelines can work on the water. Besides, The pipe floats are an easy-to-install solution, which allows pipes to bend, while maintaining low resistance to waves, wind, and current.